TWO STAGE LIQUID RING VACUUM PUMP & MONO-BLOCK VACUUM PUMP
'IVT' TWO STAGE VACUUM PUMP
'IVT' Two stage vacuum pumps are better design than single stage vacuum pumps, having advantage of higher capacity at high vacuum and also requires low quantity of water at low pressure compared to single stage vacuum pump. IVT liquid ring vacuum pumps are highly reliable and efficient. These pumps, with their integral two stage impeller, are able to condense process vapors and to recover or dispose of the vapors. They are designed to handle large amounts of liquid carryover without difficulty. This ensures reliability under the most demanding applications. IVT pump develops maximum vacuum of 720 mmHg, when sealing water temperature is 30° Celsius (755 mmHg of barometric pressure and suction temperature of 30° Celsius) due to its latest technology and design.
Applications :
Features & Advantages :
Range:
Material of construction :
- Casing / Side covers / Bracket / Control plates - Cast iron
- Impeller (I & II Stage) - SS-316
- Shaft - SS-410
'IVM' MONO-BLOCK (CLOSE COUPLED) VACUUM PUMP
'IVM' Mono-block (Close coupled) liquid ring vacuum pumps are very compact, easy to install and assemble with smooth operation. These pumps are assembled directly to motor flange and shaft. When compared to conventional pumps, IVM pump's mono-block design delivers the benefits of a simple, compact and economical installation. Since the pump and motor are integral and self supporting, there is no need for additional baseplates, couplings or guards, which add to the cost, complexity and overall size of the installation. The IVM pump is expertly designed and manufactured to be quiet and vibration free. They can develop maximum vacuum of 710 mmHg, when sealing water temperature is 30° Celsius (755 mmHg of barometric pressure and suction temperature of 30° Celsius).
Applications :
Features & Advantages:
Range:
Material of construction :
- Casing / Side covers / Bracket / Control plates - Cast iron
- Impeller (I & II Stage) - SS-316
- Shaft - SS-410
'IVT' Two stage vacuum pumps are better design than single stage vacuum pumps, having advantage of higher capacity at high vacuum and also requires low quantity of water at low pressure compared to single stage vacuum pump. IVT liquid ring vacuum pumps are highly reliable and efficient. These pumps, with their integral two stage impeller, are able to condense process vapors and to recover or dispose of the vapors. They are designed to handle large amounts of liquid carryover without difficulty. This ensures reliability under the most demanding applications. IVT pump develops maximum vacuum of 720 mmHg, when sealing water temperature is 30° Celsius (755 mmHg of barometric pressure and suction temperature of 30° Celsius) due to its latest technology and design.
Applications :
- Dehydration and filtration process
- Distillation, evaporation and drying
- Deodorization and evacuation
- Sterilizing and conveying
- Venting and sucking
- Moisture extraction and concentration
- Chemical industries
- Petrochemical industries
- Power industries
Features & Advantages :
- Simple and rugged construction
- Trouble free operation
- Easily handles dust laden gases
- Pump without Teflon ball for enhanced performance
- Provides continuous vacuum without pressure pulsations
- Lack of metal-metal contact reduces pump wear and eliminates the need for lubrication
- Can handle small particles (as long as not abrasive)
- Only one rotating part
- Can be fabricated from any castable metal
- Minimal noise and vibration
- Simple maintenance and rebuilding procedures
- Slow rotational speed maximizes operating life
- No lubricating liquid in the vacuum chamber, preventing contamination
- Nearly iso-thermal
- Can handle both condensable and non-condensable gases
Range:
- Capacity - 90 to 1800 m3/h
- Vacuum - Up to 720 mmHg
- Power - 5 to 90 Hp
- Pump speed - 1450 Rpm
Material of construction :
- Casing / Side covers / Bracket / Control plates - Cast iron
- Impeller (I & II Stage) - SS-316
- Shaft - SS-410
'IVM' MONO-BLOCK (CLOSE COUPLED) VACUUM PUMP
'IVM' Mono-block (Close coupled) liquid ring vacuum pumps are very compact, easy to install and assemble with smooth operation. These pumps are assembled directly to motor flange and shaft. When compared to conventional pumps, IVM pump's mono-block design delivers the benefits of a simple, compact and economical installation. Since the pump and motor are integral and self supporting, there is no need for additional baseplates, couplings or guards, which add to the cost, complexity and overall size of the installation. The IVM pump is expertly designed and manufactured to be quiet and vibration free. They can develop maximum vacuum of 710 mmHg, when sealing water temperature is 30° Celsius (755 mmHg of barometric pressure and suction temperature of 30° Celsius).
Applications :
- Laboratory usage
- Priming purpose
- Pilot plants
- Filtration process
- Drying
- Plastics industry
- Chemical industry
- Medical technology
- Food and beverage industry
Features & Advantages:
- Compact and mobile
- Precision-balanced rotor
- Rugged design for reliable operation and long service life
- Trouble free operation
- Easy to maintain
- Zero leakage due to mechanical seal
- Reinforced stainless-steel shaft in the pump body
Range:
- Capacity - 30 to 330 m3/h
- Vacuum - Up to 710 mmHg
- Power - 2 to 15 Hp
- Pump speed - 1450 Rpm
Material of construction :
- Casing / Side covers / Bracket / Control plates - Cast iron
- Impeller (I & II Stage) - SS-316
- Shaft - SS-410
![]()
|
![]()
|