POLYPROPYLENE / PVDF / PTFE / SS-316
(SOLENOID DOSING / PLUNGER METERING / DIAPHRAGM METERING)
CHEMICALS / ACIDS / SOLVENTS / FOOD & BEVERAGE / PHARMA
SOLENOID DOSING PUMP
It is a positive displacement diaphragm metering pump operating at 220V 50Hz supply. It is base mountable. Solenoid pushes the diaphragm which in turn pushes the liquid into the system. Solenoid is actuated by a solid state electronic circuit. It has two controls for the desired accuracy of dosing -
- Stroke Control : 0 - 100 %
- Pulse Control : 0 - 10 %
MODELS :
- Capacity - 0 to 5 LPH / Pressure up to 5 Bar
- Capacity - 0 to 10 LPH / Pressure up to 2 Bar
- Capacity - 0 to 20 LPH / Pressure up to 6 Bar
FEATURES :
- Polypropylene or PVDF liquid head, housing & valves for excellent resistance to corrosive chemical agents
- High quality hot rated solenoid is designed to dissipate heat. Capacities & pressures do not derate even over extended use
- Teflon faced metal reinforced diaphragm is designed to ensure long life & leak free operation even under the most demanding application
- State of the art epoxy coated electronic circuit is unaffected by temperature variations & other electrical disturbances
- Air Bleed arrangement built into pump head
- Double ball NRV ensure long life & better accuracy
- Operating voltage range viz.180-280 V
- Automatic voltage compensation to ensure dosing consistency
- Fault L.E.D. gives visual indication of blown fuse, low level in chemical tank or over-heating of pump
- Level Switch inter-lock facility available
- Relay output is potential free change over contact, which activates in event of pump malfunction
- Unlimited dry running capability
- Compact & Requires less space
- Easy to operate and maintain
LIQUID CONTACT MATERIAL (WETTED PARTS) : Polypropylene / PVDF
PLUNGER METERING PUMP
We offer a qualitative range of plunger type metering pumps like plunger metering pumps and industrial metering pumps. Our range of pumps are positive displacement pumps and in each cycle of operation these pumps displace a particular amount of fluid. The pumping action is created by the reciprocating motion of a plunger. As per the requirements of the customers, we offer our assortment of plunger metering pumps and industrial metering pumps in different models. Our plunger type dosing pumps and industrial metering pumps, have two parts such as drive end mechanism and the liquid end mechanism. It can be distributed in simplex, duplex or multiple heads for handling various chemicals with a common motor to facilitate the whole operation. Each head is independently connected and the capacities of each head are also independently adjustable.
Following are the specifications and features of our assortment:
LIQUID CONTACT MATERIAL (WETTED PARTS) : SS-316 / Polypropylene / PTFE
DIAPHRAGM METERING PUMP
We provide an extensive range of Hydraulic Operated Diaphragm Type Metering Pumps with PTFE Diaphragm between Hydraulic oil and the metered fluid. These multi head dosing pumps and hydraulic dosing pumps are glandless and help to avoid leakages of toxic, corrosive and costly fluids. These multi head dosing pumps and hydraulic dosing pumps capacity range is from 0 to 10000 LPH and pressure rating up to 100 Bar. Our range is available in simplex, duplex or multiple heads for handling various chemicals with a common motor to facilitate the whole operation. As per the requirement of the clients, we provide these pumps in various specifications.
Following are some of the specifications of our range:
LIQUID CONTACT MATERIAL (WETTED PARTS) : SS-316 / Polypropylene / PTFE
APPLICATIONS OF DOSING & METERING PUMPS :
- Chemical feeding
- Water chlorination
- Water treatment
- Food processing
- Effluent treatment
- Swimming pools
- Brewing
- Distillation & many more.
It is a positive displacement diaphragm metering pump operating at 220V 50Hz supply. It is base mountable. Solenoid pushes the diaphragm which in turn pushes the liquid into the system. Solenoid is actuated by a solid state electronic circuit. It has two controls for the desired accuracy of dosing -
- Stroke Control : 0 - 100 %
- Pulse Control : 0 - 10 %
MODELS :
- Capacity - 0 to 5 LPH / Pressure up to 5 Bar
- Capacity - 0 to 10 LPH / Pressure up to 2 Bar
- Capacity - 0 to 20 LPH / Pressure up to 6 Bar
FEATURES :
- Polypropylene or PVDF liquid head, housing & valves for excellent resistance to corrosive chemical agents
- High quality hot rated solenoid is designed to dissipate heat. Capacities & pressures do not derate even over extended use
- Teflon faced metal reinforced diaphragm is designed to ensure long life & leak free operation even under the most demanding application
- State of the art epoxy coated electronic circuit is unaffected by temperature variations & other electrical disturbances
- Air Bleed arrangement built into pump head
- Double ball NRV ensure long life & better accuracy
- Operating voltage range viz.180-280 V
- Automatic voltage compensation to ensure dosing consistency
- Fault L.E.D. gives visual indication of blown fuse, low level in chemical tank or over-heating of pump
- Level Switch inter-lock facility available
- Relay output is potential free change over contact, which activates in event of pump malfunction
- Unlimited dry running capability
- Compact & Requires less space
- Easy to operate and maintain
LIQUID CONTACT MATERIAL (WETTED PARTS) : Polypropylene / PVDF
PLUNGER METERING PUMP
We offer a qualitative range of plunger type metering pumps like plunger metering pumps and industrial metering pumps. Our range of pumps are positive displacement pumps and in each cycle of operation these pumps displace a particular amount of fluid. The pumping action is created by the reciprocating motion of a plunger. As per the requirements of the customers, we offer our assortment of plunger metering pumps and industrial metering pumps in different models. Our plunger type dosing pumps and industrial metering pumps, have two parts such as drive end mechanism and the liquid end mechanism. It can be distributed in simplex, duplex or multiple heads for handling various chemicals with a common motor to facilitate the whole operation. Each head is independently connected and the capacities of each head are also independently adjustable.
Following are the specifications and features of our assortment:
- It can achieve flow rates up to 10000 LPH and delivery pressure rating up to 400 Bar. Steady state metering accuracy of +/-1% of pump output
- At single setting of stroke from 10% to 100% (turn down ratio 10:1)
- Repeatability better than +/-2.5% of set point
- Easily handles corrosive, abrasive or viscous fluids
- Heating of cooling jackets for liquid head also available
- Low NPSHR requirement
- Flow metering accuracy is almost independent of back pressure of liquid
- Discharge flow rate is linear to aeration of stroke length
LIQUID CONTACT MATERIAL (WETTED PARTS) : SS-316 / Polypropylene / PTFE
DIAPHRAGM METERING PUMP
We provide an extensive range of Hydraulic Operated Diaphragm Type Metering Pumps with PTFE Diaphragm between Hydraulic oil and the metered fluid. These multi head dosing pumps and hydraulic dosing pumps are glandless and help to avoid leakages of toxic, corrosive and costly fluids. These multi head dosing pumps and hydraulic dosing pumps capacity range is from 0 to 10000 LPH and pressure rating up to 100 Bar. Our range is available in simplex, duplex or multiple heads for handling various chemicals with a common motor to facilitate the whole operation. As per the requirement of the clients, we provide these pumps in various specifications.
Following are some of the specifications of our range:
- Easily handles corrosive, abrasive or viscous fluids
- Steady state metering accuracy of +/-1% of pump output, at single setting of stroke from 10% to 100%. (turn down ration 10:1)
- Repeatability better than +/-2.5% of set point
- Flow metering accuracy is almost independent of back pressure of liquid
- Discharge flow rate is linear to variation of stroke length
- Automatic air bleeding from the hydraulic oil to ensure better metering accuracy
- Arrangement of in-built pressure relief valve to protect the pump from pressure exceeding the rated pressure
- Diaphragm is always balanced between the pressures exerted by the hydraulic oil and the liquid to be dosed
LIQUID CONTACT MATERIAL (WETTED PARTS) : SS-316 / Polypropylene / PTFE
APPLICATIONS OF DOSING & METERING PUMPS :
- Chemical feeding
- Water chlorination
- Water treatment
- Food processing
- Effluent treatment
- Swimming pools
- Brewing
- Distillation & many more.
|
|
|
|
|
| ||||||||||||
