POMPA INDUSTRI DAN PROSES JAKARTA INDONESIA INDUSTRIAL AND PROCESS PUMPS

Terjemahkan

Kami khusus menjual POMPA INDUSTRI DAN PROSES. Silakan HUBUNGI kami untuk kebutuhan Anda.
Fokus kami adalah untuk menjual produk tepat dan tidak hanya mengikuti merek.
Kami minta maaf atas tidak bisa melayani customer yang meminta merek spesifik.

INTRODUCTION :
PT. DEVSAAN INDUSTECH, based in Jakarta-Indonesia, sells various types of pumps & couplings exclusively for industrial & process applications. We also deal on STORK (JOHNSON) pumps, KSB pumps, ABB Three phase electric motors, BONFIGLIOLI helical gear box, NBE Single phase electric motors and POLYPROPYLENE valves & fittings. We strive to provide accurate, timely & cost effective solutions based on specific needs of our customers with quality products, service & commitment being backed by over fourteen years experience in this business.

OUR ADVANTAGE :

Ready stock of products & spares
Competitive price
Timely delivery
Accurate technical advice for right product selection
Timely after sales service

PRODUCT OVERVIEW :

ROTARY HELICAL GEAR PUMPS & ROTARY TWIN GEAR PUMPS in Cast Iron, SS-316 & Jacketed construction with capacity up to 550 M3/Hour, Working pressure is up to 35 Bar, Operating temperature up to 250° Celsius, Pump sizes from 1/4" - 12" & Maximum pumping viscosity up to 100.000 Cst. These pumps can be used for Viscous oils, CPO, Hot oils, Fuel oils, Asphalt, Bitumen, Food & Beverage industry, Pharmaceutical industry, Chemical industry and Sanitary applications.
PNEUMATIC DIAPHRAGM PUMPS in Aluminium, Polypropylene & SS-316 construction with Buna-N, Neoprene or Teflon inner components. Pump sizes available from 1/2" - 3" and capacity up to 50 M3/Hour.
PNEUMATIC SUBMERSIBLE PUMP for Mining & Petroleum applications with capacity up to 48 M3/Hour and maximum discharge head up to 30 Meters.
SELF PRIMING TRANSFER PUMPS with Semi-open impeller and pump sizes from 1.25" - 3". These pumps come with capacity up to 75 M3/Hour and maximum discharge head up to 35 Meters. They can be used for fuel transfer, sea water transfer, sewage and effluent pumping applications.
ROTARY TRI LOBE PUMPS in full SS-316 construction and CLEAN IN PLACE (CIP) design with pump sizes available from 1" - 4". Working pressure is up to 7 Bar. These pumps are used for Food & Beverage industry, Chemical industry and Sanitary applications.
PROGRESSIVE CAVITY SCREW PUMPS in SS-304, SS-316 and TOOL STEEL construction with capacity up to 110 M3/Hour and working pressure up to 12 Bar for use in Food & Beverage industry, Chemical industry, Waste water applications & Sanitary applications. We also stock SS-316 Vertical screw pump for viscous liquids.
BARREL PUMPS SS-316 & POLYPROPYLENE material with option of Electric motor and Pneumatic motor. These pumps can be used to transfer various liquids from drums of all sizes. Some of the liquids handled with these pumps are Toxic chemicals, Acids, Food & Beverage products, Edible oils, Solvents, Emulsifiers, Surfactants, Suspensions, Syrup bases, Lubricants and Fuel oils. Maximum capacity is up to 100 LPM & maximum discharge head up to 10 Meters.
HIGH VISCOUS BARREL PUMPS in SS-316 and Mild steel construction operated with 960 Rpm TEFC electric motor. These pumps can be used for all kinds of viscous liquids such as oils, resins, lubricants, grease, edible oils, syrups, pastes, glucose, chemicals and many more. Industries served include chemical, pharmaceutical, food & beverage and oil blending. Maximum capacity up to 7.2 M3/Hour and working pressure up to 25 Bar.
HAND OPERATED ROTARY DRUM PUMPS in SS-316, Polypropylene and Aluminium construction for transfer of Toxic chemicals, Acids, Food & Beverage products, Edible oils, Viscous oils, Solvents, Emulsifiers, Surfactants, Suspensions, Syrup bases, Lubricants and Fuel oils. Maximum capacity is up to 1 Liter/Rotation & maximum discharge head up to 20 Meters.
SS-316 CENTRIFUGAL PUMPS with Mechanical seal from pump size 1/2" - 4" with capacity up to 106 M3/Hour & maximum discharge head up to 54 Meters for Sanitary applications, Food & Beverage industry, Chemical applications & Pharmaceutical industry.
POLYPROPYLENE CENTRIFUGAL PUMPS with Mechanical seal from pump size 1" up to 3" for Toxic chemicals and Acid transfer applications, Electroplating industry, Pharmaceutical industry, Pulp & paper industry, Fertilizer plants, Steel industry, Solvent & Dye industry and any other Corrosive application.
POLYPROPYLENE AND PVDF MAGNETIC DRIVE PUMPS with 100 % leak proof seal-less magnets and no shaft seal. Pump sizes from 0.5" up to 1.5". Ideal for use with Toxic chemicals, Acids, Dyes, Solvents, Petrol, Kerosene, Acid pickling line, Boiler descaling application, Plating industries, Galvanising, Anodising, Laboratory applications, Water treatment plants and any other Corrosive application.
CENTRIFUGAL PUMPS WITH OPEN IMPELLER in Cast iron, SS-304 or SS-316 construction with capacity up to 3000 M3/Hour, maximum discharge head up to 60 Meters and solid consistency up to 6 %. These pumps are used for Pulp & paper industry, Chemical industry, Crude palm oil application, Waste water application and Sugar industry.
HOT OIL / THERMIC FLUID CENTRIFUGAL PUMPS in Carbon steel construction with Grafoil packing for Hot oil & Thermic fluid transfer applications. Capacity is up to 120 M3/Hour, maximum discharge head up to 60 Meters & maximum operating temperature up to 350° Celsius.
DOSING & METERING PUMPS in SS-316 & Polypropylene construction in Solenoid, Plunger or Diaphragm configurations with maximum capacity up to 831 LPH & maximum working pressure up to 99 Bar.
VOLUTE TYPE CENTRIFUGAL PUMP with Semi-open impeller having capacity up to 290 M3/Hour and maximum discharge head up to 26 Meters. These pumps can be used for Water transfer, Diesel transfer, Sewage treatment plants & Waste water pumping applications.
STORK (JOHNSON) PUMPS - CN End suction centrifugal pump / MCHZ Multistage pump / SRT (TG) Internal gear pump
KSB END SUCTION CENTRIFUGAL PUMP - KSB MEGA End suction centrifugal pump.
ABB ELECTRIC MOTORS - 3 Phase / 380V / 50 Hz / 1500 Rpm (4 Poles) / 3000 Rpm (2 Poles) / B3 (Foot) and B5 (Flange) mounting.
BONFIGLIOLI HELICAL GEAR BOX TYPE AS - Input (N1)1400 Rpm / Input IEC Flanged motor / B3 (Foot) mounting / Shaft output.
NBE ELECTRIC MOTORS - 1 Phase / 220V / 50 Hz / 1500 Rpm (4 Poles) / 3000 Rpm (2 Poles) / B3 (Foot) mounting.
POLYPROPYLENE VALVES & FITTINGS - PP Ball valve, PP Non-return (Check) valve, PP Foot valve, PP Diaphragm valve, PP Y-Strainer and PP Hose nipples for use in chemical, acid, solvent, effluent, petroleum, pharma, sugar, paper and pulp industries.
JAW-FLEX COUPLING made of Graded Cast Iron with Phospating process for perfect alignment of pump & motor. These coupling fitted with the best quality Nitrile synthetic rubber for long operational life.

We stock and supply the above products for various APPLICATIONS and are ready to serve our customer all over Indonesia.

Our product quality is second to none and we stand by all our products with a GUARANTEE of one year against any manufacturing defects. Major spares are readily available for all our products.